General Features

• Natural appearance without varnish
• Application by brush/cloth/dipping
• Translucent showing texture
• Richly pigmented
• Does not contain heavy metal and lead
• Ready to use

Usage Areas

• All indoor/outdoor wood
• Pergolas
• Door and window joinery
• Balcony railings
• Shutters
• Solid or hardwood floors
• Facade coverings
• Fabric
• Fences
• Wooden ceilings

Type

Water based colorant

Covering

1 L with 10-12 m² depending on the type of wood

Number of Floors

1 floor

Application Method

Brush, cloth, dip

Drying Time

4-6 hours (Full Drying)

Viscosity (DIN4, 20°C)

12 seconds ± 2

VOC (Volatile Organic Compounds)

73 g/L

Packaging

2.5L

TIPS:

• Transparent varnish is not recommended for use on exterior surfaces as it has no UV resistance.
• To avoid fold marks; Apply in small areas along the wood fibers and finish the application on the cut parts of the wood. Also, always brush towards the unpainted area that was last applied and then come back to the painted surface to absorb the excess paint.
• To obtain a homogeneous appearance, apply in the direction of the grains in the wood.
• Always start painting at the top of the wood.

• To prevent glass, hinges, locks, door handles and other accessories from being painted, cover these sections with masking tape before starting the application.
• Make sure the entire surface of the wood is painted for good protection. Don't forget to apply it to the headboards, the top and bottom edges of the doors, and under the window sills.
• Make sure that the edges and corners of the wood you will apply are chamfered (rounded). Since you cannot apply enough product to these sharp corners, you cannot provide adequate protection.