🌿 GENERAL FEATURES

• Natural appearance without varnish
• Application by brush / cloth / dipping
• Translucent showing texture
• Rich color pigmented
• Does not contain heavy metals and lead
• Ready to use

🧰 AREAS OF USE

• All indoor/outdoor woods
• Pergolas
• Door and window joinery
• Balcony railings
• Blinds
• Solid or hardwood floors
• Facade coverings
• Paneling
• Fences
• Wooden ceilings

🔍 TECHNICAL INFORMATION

Type:
Water based colorant

Covering:
10–12 m² with 1 L (depending on the type of wood)

Number of Floors:
1 floor

Application Method:
Brush, cloth, dip

Drying Time:
4–6 hours (Full Drying)

Viscosity (DIN4, 20°C):
12 seconds ± 2

VOC (Volatile Organic Compounds):
73g/L

Packaging:
2.5 L

💡 TIPS

• Since transparent varnish has no UV resistance, it is not recommended for use on exterior surfaces.
• To avoid fold marks; Apply in small areas along the wood fibers and finish the application on the cut parts of the wood. Also, always brush towards the unpainted area that was last applied and then come back to the painted surface to absorb the excess paint.
• To obtain a homogeneous appearance, apply in the direction of the grains in the wood.
• Always start painting at the top of the wood.
• To prevent glass, hinges, locks, door handles and other accessories from being painted, cover these parts with masking tape before starting the application.
• Make sure the entire surface of the wood is painted for good protection. Don't forget to apply it to the headboards, the top and bottom edges of the doors, and under the window sills.
• Make sure that the edges and corners of the wood you will apply are chamfered (rounded). Since you cannot apply enough product to these sharp corners, you cannot provide adequate protection.