Wood Protection and Maintenance

Protect Wooden Surfaces for Many Years

Wooden elements used outdoors; sunlight, rain, moisture, May be exposed to temperature changes and environmental factors. regular control and correct maintenance practices, the appearance and use of the wood Helps preserve life.

Regular Surface Check

Wooden surfaces may crack, color change, or crack at regular intervals. against blistering, surface abrasion and moisture-induced deformations check. Surface problems detected early are easier can be resolved.

Cleaning Application

Softly remove dust, dirt, leaf debris and environmental debris. Clean with a brush or damp cloth. wooden surface Hard brushes and abrasive cleaning that can cause damage Do not use materials.

Protective Product Application

Wood protective oil, varnish or paint suitable for outdoor use. Paint products should be preferred. surface before application. clean, dry and in accordance with the product manufacturer's instructions must be prepared.

Preventing Moisture and Water Accumulation

Water should not be allowed to accumulate on wooden surfaces for a long time. Rainwater drainage, floor slope and connection points are regular It should be controlled to prevent moisture from remaining on the structure.

Checking Ports

Combining wooden profiles and metal fittings Inspect the points regularly. Loosening screws are controlled The connections must be tightened properly and there is no play or movement in the connections. It should be checked that there is no

Seasonal Maintenance

Especially before winter and after the busy summer period, general maintenance is recommended. Condition of the surface protector, connections, Water drainage areas and the general appearance of the wood should be checked.

Recommended Maintenance Intervals

Maintenance frequency; depending on the type of wood, the protective product used and the environmental may vary depending on conditions.

General surface control	Every three to six months
surface cleaning	According to need and environmental pollution
Connection control	At least once a year
Preventive maintenance application	According to the instructions of the product used and the surface condition

Apps to Avoid

• Do not apply high pressure water too close to the wood surface.
• Do not use abrasives, harsh chemicals or unsuitable solvents.
• Do not apply protective oil, paint or varnish to a wet or damp surface.
• Do not continue using parts with cracks, loosening or deformation without checking them.

Important Information

Wood is a natural material. Color change over time, superficial Cracks and texture differences may be seen. When choosing the maintenance method the type of wood used and the application instructions of the protective product should be taken into consideration.